I ended my post on Day 5 noting that I’d started one of the aprons. Before I pick up on that, let me cover some early conclusions about my material choice. The simple statement is: ‘whitewood’ from the borg is a poor choice to use in the construction of this bench. In addition to being […]
Tag Archives: tool
Building the Paul Sellers Workbench – Update/Day 5
Since the plan of scrubbing after glue-up went well on the first (front) slab, I began the process on the second slab. The stock was slightly more challenging to get jointed than that for the front slab. The glue-up for this slab went poorly. I started out fine using James Thompson’s recommendation of dampening the […]
Building the Paul Sellers Workbench – Day 3 & 4
Progress has been slower that desired, but on par with expected. After glue-up on Day 2 it rained intermittently, permitting no work other than removing the clamps after 24 hours. I was pleasantly surprised that no tell-tale sounds of creaking glue joints occurred. Turning the scallops into a slab As was mentioned in my first […]
Building the Paul Sellers Workbench – Day 2
As the rain had stopped me before gluing up on Day 1, my goal was to get a lamination finished. Since my stock was still uneven, I went through each board with a straight-edge and jointed them with a No. 5. I hadn’t been very careful when I first smoothed the faces of the boards, […]
Resurrected Saw
This was a great garage sale find. The guy’s father had about 12 hand saws of various sorts, I bought 7 of them including a mishandled tenon saw and a latter model mitre-box saw. It’s a good ol’ D8 24″ crosscut 8 TPI. The medallion dates it from 1898-1917 and the etch indicates the later […]
Servicing a No. 921 Brace Ratchet
One of my recent flea market finds, a Stanley No. 921 10in-Y brace, needed some fettling. The ratchet checked out fine before I bought it. So did the jaws, I love the expression on people’s faces when you take two whole minutes to unscrew the chuck, check the jaws and put it back. When I […]